Flysky
← Back to overview

FS-G7P+

Hardcore upgrade, evolved control experience

The FS-G7P+ is the upgraded G7P wheel transmitter for cars and boats: 10 channels instead of seven, double the memory, and an FS-R11P 11-channel receiver in the box so every PWM channel is usable without an expander. It keeps the 305 g body, the built-in antenna and the ANT protocol, and adds a tournament-grade foam steering wheel as standard.

10 channelsANT protocolFS-R11P receiver included305 g body
Downloads & firmwareBuy
FS-G7P+

Now as the G7P+ with the ultimate upgrade: 10 channels based on the ANT protocol—the consistent evolution of the popular G7P for RC cars and boats. Compared to the G7P, the Plus version adds more channels including the FS-R11P receiver, an optimized user interface, and doubled model memory of 512KB. The high-performance chip with increased memory capacity enables future upgrades, while the new high-density foam competition steering wheel grip provides precision and comfort. All settings can be conveniently adjusted via the clear LCD display.

Features

  • 10 channels for complex vehicle setups (ANT protocol)
  • Optimized UI – context-sensitive menu items appear as needed
  • 128 x 64 LCD display
  • Type-C data port for direct connection and online updates
  • Comfortable high-density foam steering wheel grip
  • Long range ≥300 m (ground, unobstructed)

FS-G7P Features

  • 10 proportional channels
  • Two-way data transmission: signal strength can be sent back. For the standard receiver, it supports the back transmission of the detected BVD battery voltage. The sensors such as speed, temperature, voltage and height are supported;
  • Powerful mixer function: 5 groups of programming mixer + 1 group of steering mixer, track professional mixer (dual engine mixer) and 4WS crawler special mixer;
  • Display in English and Chinese, meeting different user demands;
  • Support the switching between the one-way and two-way communication modes;
  • Two-in-one ESC parameters can be set;
  • For the BVD battery voltage on the main interface, the display includes Idle Up, Throttle Cut, CH Speed;
  • Level 4096 resolution;
  • 20 sets of model data;
  • Beginner mode;
  • Timer/Lap counter;
  • Rate and curve;
  • Servo frequency;
  • Update receiver firmware;
  • Support channel expansion;
  • Integrated SVC function;
  • Restore factory settings;
  • Stick calibration.
"Smart Controls, On-Demand Activation": the self-locking switch SW1, the VR1 and VR2 knobs, the TR1 reset switches, the five-way switch key, the three-position toggle SW3 and the SW2 reset key, called out on a front and a side view of the transmitter.