← Back to receivers
INr4-GYB
AFHDS3- PWM channels
- 4
- Antenna
- Single antenna
- Data port / output
- PWM/PPM/i-BUS2/S.BUS/i-BUS
- Dimensions
- 17 x 29 x 16.6mm
- Weight
- 6.5g
The INr4-GYB receiver is the ideal support when using a Flysky remote control. The receiver makes use of a technology used by several Flysky transmitters - the automatic frequency hopping digital system (short: AFHDS3). With a bidirectional transmission system via the antenna and the built-in gyroscope, this receiver is specially designed for the installation and output of PWM/PPM/i-BUS/i-BUS2 und S.BUS signals. All AFHDS3-enabled transmitters are supported for an excellent driving experience with drift cars as well as those in the F1 category or those with linear acceleration.
Technical Specifications
| PWM-Channels | 4 |
|---|---|
| RF | 2.4GHz |
| Protocol | AFHDS 3 |
| Antennas | Single |
| Input Voltage | 3.5-9V (DC) |
| Output | PWM/PPM/i-BUS/i-BUS2/S.BUS |
| Temperature | -10°C to +60°C |
| Max. Humidity | 20%-95% |
| Update | Yes, online |
| Dimensions | 17x29x16.6mm |
| Weight | 6.5g |
| Suitable for | Cars, Boats, etc. |
| Compatible Transmitter | all AFHDS3-Transmitter |
| Product Model | INr4-GYB |
|---|---|
| Adaptive transmitter | All surface transmitters which support AFHDS 3 protocol. |
| Model Type | Cars or Boats, ect. |
| PWM Channels | 4 |
| RF | 2.4GHz ISM |
| 2.4G Protocol | AFHDS 3 |
| Antenna | Single Antenna |
| Input Power | 3.5 ～ 9V/ DC |
| Data Output | PWM/PPM/i-BUS2/S.BUS/i-BUS |
| Temperature Range | -10℃ ~ +60℃ |
| Humidity Limit | 20%-95% |
| Online Update | Yes |
| Dimensions | 17*29*16.6mm |
| Weight | 6.5g |
| Certification | CE, FCC ID:N4ZINR4GYB0 |
Specifications published by www.flysky-cn.com