← Back to receivers
FGr4B
AFHDS3- PWM channels
- 4
- Antenna
- External single antenna
- Data port / output
- PWM/PPM/i.BUS out/S.BUS
- Dimensions
- 17 x 29 x 16mm
- Weight
- 6.4g
The FGr4B receiver is the ideal support when using a Flysky remote control. The receiver makes use of a technology used by several Flysky transmitters - the automatic frequency hopping digital system (short: AFHDS3). With a bidirectional transmission system via the antenna, this receiver is specially designed for the installation and output of PWM/PPM/i-BUS out/S.BUS signals. All AFHDS3-capable transmitters are supported.
Technical Specifications
| PWM-Channels | 4 |
|---|---|
| RF | 2.4GHz |
| Protocol | AFHDS 3 |
| Antennas | Dual |
| Input Voltage | 3.5-9V |
| Output | PWM/PPM/i-BUS out/S.BUS |
| Temperature | -10°C to +60°C |
| Max. Humidity | 20%-95% |
| Update | Yes, online |
| Dimensions | 17x29x16mm |
| Weight | 6.4g |
| Suitable for | Cars, Boats, etc. |
| Compatible Transmitter | all AFHDS3-Transmitter and RF-Modules (PL18, Paladin EV, NB4, NB4 Lite etc.) |
| Product Designation | FGr4B |
|---|---|
| Compatible transmitters | all AFHDS 3 transmitters and RF Modules (PL18, Paladin EV, NB4, NB4 Lite, etc.) |
| Model Type | Car/boat etc |
| PWM Channels | 4 |
| RF | 2.4GHz |
| Protocol | AFHDS 3 |
| Antenna | External Single Antenna |
| Input Power | 3.5-9V |
| Data Output | PWM/PPM/i.BUS out/S.BUS |
| Temperature Range | -10℃ to +60℃ |
| Humidity Limit | 20%-95% |
| Online Update | Yes |
| Dimensions | 17*29*16mm |
| Weight | 6.4g |
| Certification | CE，FCC ID:N4ZFGR4B000 |
Specifications published by www.flysky-cn.com